Adapters reduce muzzle rise as well as kickback for all firearms to zero for hunting & sports
tripling speed & accuracy.
Self install to Shotgun, M-16, or Handgun in 30 Seconds.
Major markets are: Hunters, sports, competition, shooting ranges,
defense, & Police ( every police car has shotgun, rifle, & handgun),
The patent pending application # 26,224 Is for product and method. Namely, the supplier as well as the end user need a permit.
Two types of firearms recoil reducers, Adapters
& Inserts, hundreds of satisfied cutomers
Adapters,Preferred
for Shotguns & M-16
Adapters fit onto the fore end of the barrel, as the Glock 45 that protrudes 1/8 of an inch
Adapters for shotguns, M-16, rifles, handguns, & revolvers are self-installed in 30 seconds & mailed worldwide
95% efficiency for every firearm. No exceptions
Zero muzzle rise tripling accuracy, speed, protection, & better hunting
Felt kick back is the reloading mechanical bounce of the slide, 5% of the
original
Bullet speed FPS is reduced by 2%, (Chronograph)
Sound is reduced by 20%. (All other muzzle brakes make the
sound louder and efficiency is 10-20%)
The anti recoil puff is forward-sideways, not to blow dirt back to the shooter
Flash suppression is increased by 60%
Can be installed in the adjustable choke of shotguns
We can mail barrel of Glock45, Beretta or Kahr Subcompact for your testing & evaluation
Specials:
Shotgun chokes. Mail your choke only to bring muzzle rise of your shotgun to zero & 95% kick back reduction while choke retains all its original functions. No change in appearance
We put inserts in any barrel of a handgun, rifle, or firearm to get zero muzzle rise & 95% felt kick back reduction...
Biomed also has Stealth Technology Check out our Stealth Technology at www.stealthir.com
Fig. 1: Adapter, 4 set screws, & wrench
Testimonials
1. The Sheriff Handgun:
With recoil insert, right hand, has zero muzzle rise. Original
handgun,left hand, has big muzzle rise & will miss target.
This
market is exclusively ours because the law requires the
supplier to be the owner of what The State purchases. We
are the only legal supplier to the Patent Pending recoil
reduction adapters & inserts, product & method. All Police
cars have shotguns, rifles, & handguns.
2. The Gun Expert:
The gun expert R.C. who tested Recoil-reduction Adapter
on the 12gauge shotgun, M-16, & Beretta 9mm handgun said: ?Dr Z. All performed as claimed...
You have a Diamond mine!?
3. The Inventor?s credibility:
Dr. Z invented the first laser scanner that read the DNA
Barcode in 1972 (US patent # 4025200). Now, it?s upgrade
is the Barcode reader used all over the World; in stores,
post office, shipping, internet...etc
4. Four Countries:
Four countries already have the M-16 adapter tested OK &
under processing to get it in their arsenal. Documents available
on request.
1. Installing the shotgun adapter:
1)Align the groove of the adapter against the
barrel foresight, Fig. 2
2) Slide the adapter over the barrel end, Fig.
3
For good alignment, the barrel end needs to be pushed against
the inside alignment. Then anchor the adapter by turning the
4 set screws one after the other half turn at a time. Then
use the leverage of the long arm of the wrench to further-tighten
the set screws. If the set screws are not securely anchored,
the adapter will fly away upon shooting. Hurting no one. The
bullet does the damage.
3) To transfer the adapter to another shotgun,
loosen set screws and pull adapter out.
Fig. 2:Align groove with foresight
Fig. 3:Push adapter over the barrel and
gradually tighten set screws.
2. Installing the M-16 Adapter:
M-16 or a rifle is carried in
all Police cars. M-16
adapter, unscrew & remove the flash suppressor. Keep needed
washers.
Thread on the Adapter 7 or more turns with the anti-recoil vents
directed sideways so the flash is away from the foresight
and no interference with re-aiming and no dirt is blown Your
browser may not support display of this image. at the shooter.
Muzzle rise is reduced to zero. Accuracy, speed, & survival
are doubled. No change in sound or in the gun appearance.The adapter 1.9 Inch long, 0.75 Diameter. Samples are available.
Fig. 4:Threaded M-16 adapter
3. Installing the Beretta 9mm Handgun Adapter:
Beretta 9mm handgun adapter is a 0.9 inch long with anchoring
set screws leaving no marks on the barrel. Anchor the adapter
to the fore end of the barrel with its anti-recoil vents
are sideways so the flash does not interfere with the foresight.
Press the adapter against the barrel to align its bore with
that of the handgun.Then anchor the adapter by turning the 4 set screws one
after the other half turn at a time.
Then use the leverage long arm of the wrench to further-tighten
the set screws.
If the set screws are not anchored, the adapter will harmlessly
fly away upon shooting.
Fig. 5: Beretta handgun adapter, with and without adapter,
one-hand shootingwith zero muzzle rise for accuracy and speed and one-hand
shooting.
Fig.5:Baretta 9mm Handgun
Fig. 6: Unscrew the flash suppressor and screw on the
Biomed
adapter onto your Big Caliber 0.5 inch long range rifle.
It works on bolt single shot, semi-auto, and fully automatic
rifles.
Fig.6 Screw Adaptor on big Caliber 0.5
inch rifle
Adapters to Rifles, Revolvers, & Big Calibers:
90% recoil reduction adapters for the Revolver, rifles, &
big caliber No change in sound.
The adapter has 4-folds flash suppression than current supressors.
Zero-flash Adapters for Licensing only:
Zero flash, zero recoil, & zero muzzle-rise adapters for M-16
and the Big Caliber 0.5 rifles.
